QMiX CONCRETE
No-fines Concrete Supplier
No-fines permeable concrete from QMiX Concrete is a specialist concrete mix designed to allow water to pass freely through the structure, providing effective drainage while maintaining structural stability for suitable applications.
Unlike traditional concrete, no-fines concrete contains little to no fine aggregates, creating interconnected voids that allow water to drain naturally. This makes it an ideal solution for permeable surfaces, drainage layers, and applications where water management is critical.
No fines permeable concrete is also commonly used as a permeable sub-base for resin-bound driveways, allowing water to drain naturally while providing a stable base layer.
Why Choose QMiX Concrete for No-fines Permeable Concrete?
✔ Excellent Water Permeability – Allows water to drain freely through the concrete.
✔ Effective Drainage Solution – Reduces surface water build-up and improves water management.
✔ Lightweight & Open Structure – Contains minimal fine aggregates to create voids.
✔ Reduced Surface Water Runoff – Supports permeable construction requirements.
✔ Suitable for Specific Structural Uses – Ideal where drainage is prioritised over strength.
✔ Ready-Mix & Volumetric Supply – Available as ready-mix concrete or volumetric concrete.
✔ Reliable Local Supply – No-fines concrete supplied across Essex, Hertfordshire, Kent, and London.
For effective drainage and permeable concrete solutions, trust QMiX Concrete to supply high-quality no-fines permeable concrete produced to specification.
Offerings
- No-fines permeable ready-mix concrete
- No-fines permeable volumetric concrete
- Permeable concrete for drainage-focused applications
- Technical support for correct specification and use
Common Applications
- Permeable paving sub-bases
- Sub-base for resin-bound driveways
- Drainage layers and soakaway surrounds
- External hardstanding where drainage is required
- Sustainable drainage (SuDS) applications
Frequently Asked Questions
No-fines concrete is primarily used for drainage and permeable applications and is not suitable for high-load structural elements unless specifically designed.
No-fines concrete is primarily used for drainage and permeable applications and is not suitable for high-load structural elements unless specifically designed.
It is commonly used for permeable paving, drainage layers, soakaways, and SuDS applications where water management is required.
Yes. No-fines permeable concrete can be supplied as ready-mix concrete or volumetric concrete, depending on site requirements.
